Education & Safety

Education & Safety > Schedule of Safety & Education Courses >
 

View AGC Georgia's upcoming Membership Events

Printable Brochure for July and August Education, Safety and Professional Development Courses
offered by AGC Georgia
(includes course description, pricing, instructors)

NEED CONTINUING EDUCATION UNITS?

Most of AGC courses shown below are approved for those wanting to earn continuing education units for Residential-Basic or Residential-Light Commercial licenses under Georgia’s State Licensing Board for Residential and General Contractors.

Please note, at current time, those holding a General Contractor license are not required to earn CEUs.


ONLINE TRAINING OPPORTUNITIES

August 2014
1 BIM CM Exam
8:00am - 12:00pm
To register contact Cherri Watson - watson@agcga.org
AGC Training Center
1 Competent Person: Scaffold Safety
8:00am - 4:00pm
View Course Description or Register Online
AGC Training Center
6 LEED Green Associate Exam Prep Course
Continuing dates 13th, 20th, and 27th
Each session is 2 hours in length: 3:00pm-5:00pm EST
View Flyer
Online
7 LEED AP BD+C Exam Prep
Continuing dates 14th, 21st, and 28th
Each session is 2 hours in length: 3:00pm-5:00pm EST
View Flyer
Online
7-8 Common Sense Construction Law For Florida Contractors
Florida Construction Industry Licensing Board Approved Course Covering All Continuing Education Requirements for General and Other Licensed Contractors
1st Day 8:00am - 4:30pm
2nd Day 8:00am - 2:30pm
View Flyer and Register
AGC Training Center
13 BIM Unit 1: An Introduction to Building Information Modeling, 2nd Edition
Approved for AIA and GBCI Credits
8:00am - 5:00pm
View Flyer or Register Online
AGC Training Center
14 NPDES Level 1A Fundamentals Certification
8:00am - 5:00pm
View Course Description or Register Online
AGC Training Center
14 Construction Technology Forum
11:30am - 1:30pm
View Flyer or Register Online
AGC Training Center
15 Fall Protection
8:00am - 4:00pm
View Course Description or Register Online
AGC Training Center
19 NPDES Recertification for 1A, 1B and Level II
2:00pm - 6:00pm
View Course Description or Register Online
AGC Training Center
21-22 OSHA 10-Hour for Construction (Earn CEUs)
7:00am - 4:00pm
View Description or Register Online
Savannah
22 CPR, First Aid, and Bloodborne Pathogens (Earn CEUs)
8:00am - 4:00pm
View Course Description or Register Online
AGC Training Center
27 Asset Protection and Recovery in Georgia
8:00am - 12:00pm
View Flyer or Register Online
AGC Training Center

September 2014
3 LEED Green Associate Exam Prep Course
Continuing dates 10th, 17th, and 24th
Each session is 2 hours in length: 3:00pm-5:00pm EST
View Flyer
Online
4 LEED AP BD+C Exam Prep
Continuing dates 11th, 18th, and 25th
Each session is 2 hours in length: 3:00pm-5:00pm EST
View Flyer
Online
10 Bond What? Understanding Surety Bond Basics
Lunch and Learn
11:30am - 1:30pm
View Course Description or Register Online
AGC Training Center
12

OSHA 30-Hour for Construction (Earn CEUs)
7:00am to 4:00pm (Continuing dates 19, 26, and Oct. 3rd)
View Course Description or Register Online

AGC Training Center
16 BIM CM Exam
8:00am - 12:00pm
To register contact Cherri Watson - watson@agcga.org
AGC Training Center
17 BIM Unit 2: BIM Technology, 2nd Edition
Approved for AIA and GBCI Credits
8:00am - 5:00pm
View Flyer or Register Online
AGC Training Center
24 NPDES Recertification for 1A, 1B and Level II
2:00pm - 6:00pm
View Course Description or Register Online
AGC Training Center

October 2014
1 LEED Green Associate Exam Prep Course
Continuing dates 8th, 15th, and 22nd
Each session is 2 hours in length: 3:00pm-5:00pm EST
View Flyer
Online
9-10 OSHA 10-Hour for Construction (Earn CEUs)
7:00am - 4:00pm
View Description or Register Online
AGC Training Center
9 LEED AP BD+C Exam Prep
Continuing dates 16th, 23rd, and 30th
Each session is 2 hours in length: 3:00pm-5:00pm EST
View Flyer
Online
10 CPR, First Aid, and Bloodborne Pathogens (Earn CEUs)
8:00am - 4:00pm
View Course Description or Register Online
AGC Training Center
13 NPDES Level 1A Fundamentals Certification
8:00am - 5:00pm
View Course Description or Register Online
AGC Training Center
15 BIM Unit 3: BIM Contract Negotiation and Risk Allocation, 1st Edition
Approved for AIA and GBCI Credits
8:00am - 5:00pm
View Flyer or Register Online
AGC Training Center
17 Qualified Crane Signal Persons/Rigger
8:00am - 4:00pm
View Course Description or Register Online
AGC Training Center
22 BIM CM Exam
8:00am - 12:00pm
To register contact Cherri Watson - watson@agcga.org
AGC Training Center
23-24 Basic Blueprint Reading
8:00am - 4:00pm
View Course Description or Register Online
AGC Training Center
24 Competent Person:  Trenching/Excavation
8:00am - 4:00pm
View Course Description or Register Online
AGC Training Center
28 NPDES Recertification for 1A, 1B and Level II
2:00pm - 6:00pm
View Course Description or Register Online
AGC Training Center

November 2014
5 LEED Green Associate Exam Prep Course
Continuing dates 12th, 19th, and 26th
Each session is 2 hours in length: 3:00pm-5:00pm EST
View Flyer
Online
6-7 OSHA 10-Hour for Construction (Earn CEUs)
7:00am - 4:00pm
View Description or Register Online
Macon
6 LEED AP BD+C Exam Prep
Continuing dates 13th, 20th, and 26th
Each session is 2 hours in length: 3:00pm-5:00pm EST
View Flyer
Online
7 NPDES Recertification for 1A, 1B and Level II
2:00pm - 6:00pm
View Course Description or Register Online
AGC Training Center
14 Construction Quality Management (CQM)
7:30am - 5:30pm
View Description or Register Online
AGC Training Center
17 BIM CM Exam
8:00am - 12:00pm
To register contact Cherri Watson - watson@agcga.org
AGC Training Center
19 BIM Unit 4: BIM Process, Adoption, and Integration, 1st Edition
Approved for AIA and GBCI Credits
8:00am - 5:00pm
View Flyer or Register Online
AGC Training Center

December 2014
3 LEED Green Associate Exam Prep Course
Continuing dates 10th, 17th, and 23rd
Each session is 2 hours in length: 3:00pm-5:00pm EST
View Flyer
Online
4

LEED AP BD+C Exam Prep
Continuing dates 11th, 18th, and 19th
Each session is 2 hours in length: 3:00pm-5:00pm EST
View Flyer

Online
5 NPDES Recertification for 1A, 1B and Level II
8:00am - Noon
View Course Description or Register Online
AGC Training Center
5

CPR, First Aid, and Bloodborne Pathogens (Earn CEUs)
8:00am - 4:00pm
View Course Description or Register Online

AGC Training Center
9-12

OSHA 30-Hour for Construction (Earn CEUs)
7:00am to 4:00pm
View Course Description or Register Online

AGC Training Center
12 NPDES Level 1A Fundamentals Certification
8:00am - 5:00pm
View Course Description or Register Online
AGC Training Center
18 BIM CM Exam
8:00am - 12:00pm
To register contact Cherri Watson - watson@agcga.org
AGC Training Center
January 2015
9 NPDES Recertification for 1A, 1B and Level II
2:00pm - 6:00pm
View Course Description or Register Online
AGC Training Center
27 BIM CM Exam
8:00am - 12:00pm
To register contact Cherri Watson - watson@agcga.org
AGC Training Center

February 2015
26 BIM CM Exam
8:00am - 12:00pm
To register contact Cherri Watson - watson@agcga.org
AGC Training Center

March 2015
25 BIM CM Exam
8:00am - 12:00pm
To register contact Cherri Watson - watson@agcga.org
AGC Training Center

April 2015
22 BIM CM Exam
8:00am - 12:00pm
To register contact Cherri Watson - watson@agcga.org
AGC Training Center

May 2015
20 BIM CM Exam
8:00am - 12:00pm
To register contact Cherri Watson - watson@agcga.org
AGC Training Center

June 2015
25 BIM CM Exam
8:00am - 12:00pm
To register contact Cherri Watson - watson@agcga.org
AGC Training Center

July 2015

August 2015
26 BIM CM Exam
8:00am - 12:00pm
To register contact Cherri Watson - watson@agcga.org
AGC Training Center

September 2015
24 BIM CM Exam
8:00am - 12:00pm
To register contact Cherri Watson - watson@agcga.org
AGC Training Center

October 2015
22 BIM CM Exam
8:00am - 12:00pm
To register contact Cherri Watson - watson@agcga.org
AGC Training Center

November 2015
19 BIM CM Exam
8:00am - 12:00pm
To register contact Cherri Watson - watson@agcga.org
AGC Training Center

December 2015